Products Details

Brass lock gate valve is a valve made of brass material, with good sealing performance and corrosion resistance, suitable for the control of a variety of media. The design of this valve allows the user to fix the open or closed state of the valve through the locking mechanism to prevent unauthorized access or misoperation, ensuring the safety and reliability of use.

Key features of brass lock gate valves include:

The use of high-grade brass material, with high strength and corrosion resistance.
The integrated locking mechanism ensures safe locking of the valve in the open or closed position.
Precision engineering ensures precise control of fluid flow and smooth operation of valves.
Suitable for a variety of industrial, commercial and residential applications, including water distribution networks, pipework and chemical treatment plants.
Meet or exceed industry standards and regulations to ensure safety, reliability and compliance.
In terms of technical specifications, brass lock gate valves usually have the following parameters:

Nominal pressure: generally not more than 1.6MPa.
Working medium: water, non-corrosive liquid, some models are also suitable for saturated steam.
Operating temperature: range from -20 ° C to 120 ° C or higher.
Thread standard: According to ISO 228 standard or other related standards.
In addition, the application range of brass lock gate valves is quite wide, they can be used not only as a flow control and cut-off in ordinary water and gas piping systems, but also in situations where additional safety measures are required, such as flow control in heating and water supply systems, as well as industrial applications where there is a need to prevent illegal operation or misoperation.

The installation and use of brass lock gate valves should follow some basic guidelines, such as:

Verify that the rated parameters of the valve comply with the system requirements.
Installation by trained and experienced personnel.
Ensure pipe and valve thread specifications are consistent, and the center line is coaxial.
Clean piping thoroughly before installation to ensure no rust and dirt.
After installation, perform several switching operations to verify that the valve is working normally.
When selecting a brass lock gate valve, details such as its sealing surface configuration, stem thread position, and connection mode should also be considered to ensure that they meet the needs of a specific application.