Products Details

The plunger Angle globe valve is a special type of globe valve, which has a plunger shaped disc to provide good sealing performance. This valve is usually used to control the flow of fluids, such as liquefied petroleum gas, water, steam, oil and acid media. The opening height of the plunger Angle globe valve is usually 25% to 30% of the nominal diameter, and the flow rate reaches the maximum at this time, indicating that the valve has been fully opened. In addition, the medium flow direction of the plunger Angle globe valve can be top-down, which helps to improve the sealing performance of the valve.

In terms of installation and maintenance, hand wheel or handle operated plunger Angle globe valves can be installed anywhere in the pipeline, but the flow of media should be consistent with the direction of the arrow shown on the body. At the same time, the handwheel, handle and transmission mechanism are not allowed to be used for lifting purposes. For high temperature and high pressure plunger Angle globe valves, they are widely used in low and medium pressure and high pressure systems because of their advantages such as small friction between sealing surfaces, strong durability, small opening height, convenient manufacturing and maintenance.

The type of plunger Angle globe valve is J44W, nominal diameter range from 15mm to 300mm, nominal pressure from 16.0MPa to 4.0MPa, applicable temperature range from -200°C to 425°C. The design and application of this valve are wide and can meet different industrial needs.